http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/-t1.htm Wed, 30 Sep 2009 10:31:04 GMT 10 http://illiweb.com/fa/prosilver/site_logo.gif http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/-t1.htm http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/error-codes-33-10-t252.htm Matt Parker I bought a Gulfstream ss30 October last year just before Gledhill went into administration. About a month after it being installed started having problems with the boiler cutting out due to the above error codes. This happens intermittently with no regularity as to when, however i have noticed that it occurs more frequently when a bath is run as opposed to a shower. I finally bit the bullet yesterday and called an engineer recommended by Gledhill; he had no idea as to what the problem was but ... Gulfstream A-Class Wed, 30 Sep 2009 10:31:04 GMT http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/error-codes-33-10-t252.htm#632 http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/error-codes-33-10-t252.htm http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/gulfstream-a-class-30-ov-t216.htm Confused Am I the lucky one, the first problem listed. I have the above appliance and it gets as far as Fan on and sparking but no ignition. Its supposed to try 5 times but fails and flashes Red after first failure. Am I right in thinking that by getting to sparking stage after pressing reset button B1 all sensors etc are OK. I have 146v DC at gas valve. I appear to have electric down the earth wire on the Electrode spade if its removed from the spade. Any ideas. Cheers in anticipation. Gulfstream A-Class Sun, 09 Aug 2009 16:37:32 GMT http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/gulfstream-a-class-30-ov-t216.htm#551 http://gledhill-repairs.forumotion.net/gulfstream-a-class-f16/gulfstream-a-class-30-ov-t216.htm