using switch only for system

View previous topic View next topic Go down

using switch only for system

Post  ddherd on Tue Aug 28, 2012 3:11 am

what would advantages/disadvantages be resulting from 2 hours per day use of switch only rather than normal boiler operation

ddherd

Posts : 3
Join date : 2012-08-28

View user profile

Back to top Go down

Re: using switch only for system

Post  mike on Tue Aug 28, 2012 3:49 am

Never use the switch unless emergency.
Plus very costly.
It is a back up only.
Mike

mike

Posts : 1626
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Re: using switch only for system

Post  ddherd on Tue Aug 28, 2012 5:37 am

thanks for your quick reply mike--the problem i have is i have tenants in the property where the boilermate 2000 is installed who think it is going to be more cost effective to use switch for a couple of hours per day than run the system with the oil boiler and wish to at least try using it by the switch setting for 2 hours a day for a while

ddherd

Posts : 3
Join date : 2012-08-28

View user profile

Back to top Go down

Re: using switch only for system

Post  mike on Tue Aug 28, 2012 5:53 am

You may find if used too often.
That overheating can occur.
And burn out may happen.
Would you drive a car with one of those temporary tyres on for days on end.
My advice is NOT to use only in emergency.
Matter closed
Mike

mike

Posts : 1626
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Re: using switch only for system

Post  ddherd on Tue Aug 28, 2012 6:31 am

ok--thanks again mike

ddherd

Posts : 3
Join date : 2012-08-28

View user profile

Back to top Go down

Re: using switch only for system

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum