water not hot enough
3 posters
Page 1 of 1
water not hot enough
I moved into my appartment 2 years ago. During the last month I've had problems getting enough hot water from my pulsacoil 111. The temperature fluctuates. I may be washing my hair and the water is quite hot then within a few seconds it suddenly goes cold. During the last week I haven't been able to have a warm bath. I run the tap getting luke warm water and it then suddenly has no heat at all. I get only enough water to sit in and then have to turn off the tap. Had an engineer come today but he checks things and said all is well. I find this hard to believe.
jen308- Posts : 1
Join date : 2009-02-27
Re: water not hot enough
Apologies for my delay in replying.
This is heat sensor failure. Easy to fix. Where are you?
Cheers, Mike
This is heat sensor failure. Easy to fix. Where are you?
Cheers, Mike
Overheat stat, and possible water level issue
I would check the water level in the header tank as well and then the overheat stat at the front of the unit. If you are not sure which parts these are, you can request the Pulsacoil 3 user and installation manual via this link -> Pulsacoil 3 Manual
Similar topics
» No hot water, red fault light on, after adjusting thermostat
» Pulsacoil III - no hot water, water level light off
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» Poss reason for no hot water - Check the water level at the top of the unit
» Pulsacoil III - no hot water, water level light off
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» Poss reason for no hot water - Check the water level at the top of the unit
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum