System Pressure Gauge is at 0
2 posters
Page 1 of 1
System Pressure Gauge is at 0
Sash Tue Aug 28, 2012 9:04 pm
Hello,
Just had the boiler pump replaced, it took a long time for the system to kick into speed.
In doing so, the system pressure gauge was losing pressure since the system was turned back on. Now it is at 0 , with no sign of rising back to its default 1.0 bar.
What can i do to get the system pressure back up to 1.0?
Can anyone provide an ideas?
Thank you
Just had the boiler pump replaced, it took a long time for the system to kick into speed.
In doing so, the system pressure gauge was losing pressure since the system was turned back on. Now it is at 0 , with no sign of rising back to its default 1.0 bar.
What can i do to get the system pressure back up to 1.0?
Can anyone provide an ideas?
Thank you
Sash- Posts : 6
Join date : 2012-01-01
Re: System Pressure Gauge is at 0
mike Wed Aug 29, 2012 5:27 pm
Read page 15 of the manual.
If you have not got one.
Down load one for FREE at Gledhill's website.
Mike
If you have not got one.
Down load one for FREE at Gledhill's website.
Mike
mike- Posts : 1747
Join date : 2009-10-08
Age : 71
Location : Norwich -
Similar topics» Can I leave the filling tap(the one near pressure gauge) on all the time?
» Cant add pressure to system
» System Frequently Losing Pressure
» Is it worth replacement of a Boilermate 2 system (including pumps) or is there a better similar system out there ?
» Leak from near the gauge on the upper tank
» Cant add pressure to system
» System Frequently Losing Pressure
» Is it worth replacement of a Boilermate 2 system (including pumps) or is there a better similar system out there ?
» Leak from near the gauge on the upper tank
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|