Electramate 2000 12 kw

View previous topic View next topic Go down

Electramate 2000 12 kw

Post  Barksie on Sun Nov 04, 2012 10:55 am

Hi Mike had quick read through other posts to see if there was an answer to my problem but no luck so here goes. The problem is the heating comes on for a short time and then goes off so to get the pump to run again i isolate at the local isolator leave for 30 seconds and switch back on pump runs for a short time the bottom green LED illuminates and pump goes off again. Htg pump head changed a week ago. Also the maim circuit board has only three green LEDs where all the manuals talk about four. thanks in antisipation of a reply.


Posts : 1
Join date : 2012-11-04

View user profile

Back to top Go down

Re: Electramate 2000 12 kw

Post  mike on Mon Nov 05, 2012 12:24 pm

Sounds like main board.
Check for fault codes and functions.


Posts : 1674
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum