Gledhill Repairs
Would you like to react to this message? Create an account in a few clicks or log in to continue.

If a rod stat is replaced does it have to be gledhill replacement?

3 posters

Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty If a rod stat is replaced does it have to be gledhill replacement?

Post  hayleyL Mon Mar 18, 2013 7:10 am

Any advice on the following situation would be greatly appreciated....

A few months ago out pulsacoil 2000 overheated really badly causing it to steam and damage the door frame of the cupboard it was in. The header tank was also empty. So an engineer replaced the pump, as it was sticking. And replaced the off peak rod stat assuming it was faulty causing it to overheat. The header tank was also filled.

However, since then the off peak provides only a limited amount of hot water. Enough for two short showers in the morning but by the evening it is only tepid. We have been using the peak boost switch almost every day and have now got a large electricity bill.

could this be because the rod stat was not a gledhill and just a standard one? The new stat is set to max temp. Or does anyone have any other suggestions?

Also, if anyone knows of any experts in the sussex area contact details would be great.

Thanks
Hayley

hayleyL

Posts : 6
Join date : 2012-10-27

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  Dazzaman1 Mon Mar 18, 2013 10:22 am

Hi Hayley it mite b the rod stat that was replaced is not getting up to full temperature and cutting of before it's achieving that failing that check your header tank again and make
Sure u have enough water in it cause if not that could b a problem what part of Sussex u from ??

Dazzaman1

Posts : 9
Join date : 2013-03-17

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  hayleyL Mon Mar 18, 2013 1:47 pm

thanks for your reply. i will check the header unit again. why would the stat not get to full temperaturek? should it be changed againk? we are in haywards heath, west sussex. is that in your area?

hayleyL

Posts : 6
Join date : 2012-10-27

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  Dazzaman1 Mon Mar 18, 2013 2:00 pm

It may b callabrated wrong so where it's supposed to cut of out say 70degrees it mite only b reaching say 60degrees which wouldent give u enough hot water maybe it needs
Changing again,,but let me no if there's water in header tank first vice versa the old stat got to hot hence why it overheated and u had steam everywhere and yes haywards Heath is not to far for me are u at bolnore ??

Dazzaman1

Posts : 9
Join date : 2013-03-17

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  hayleyL Mon Mar 18, 2013 4:31 pm

Yes in bolnore. I will check the header tank again tomorrow morning and the setting on the off peak stat. Thanks for your help, will be in contact again tomorrow.

hayleyL

Posts : 6
Join date : 2012-10-27

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  hayleyL Wed Mar 20, 2013 4:47 am

So i have filled up the header tank a bit more and it seems ok so far. Going to give it a few days trial. Dazzaman - are you able to send your contact details if we need to call an engineer? Thanks for your help so far

hayleyL

Posts : 6
Join date : 2012-10-27

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  Dazzaman1 Wed Mar 20, 2013 10:34 am

Hi Haley glad all is ok if u need me call me on 07763674126 many thanks

Dazzaman1

Posts : 9
Join date : 2013-03-17

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty The right thermostat details

Post  sunny.sahdev Wed Sep 11, 2013 4:14 am

Hi Haley,

The right thermostat is the XB081, you can purchase it via this link: Gledhill Pulsacoil 2000 Spares

sunny.sahdev

Posts : 383
Join date : 2013-08-21
Age : 38
Location : Vedhas Limited, 960 Capability Green

http://www.vedhas.co.uk/vedhas-what-we-do/pulsacoil-repair/#

Back to top Go down

If a rod stat is replaced does it have to be gledhill replacement? Empty Re: If a rod stat is replaced does it have to be gledhill replacement?

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum