Boilermate 2000 constantly circulating and demanding heat

View previous topic View next topic Go down

Boilermate 2000 constantly circulating and demanding heat

Post  Gary Faulkner on Mon Feb 03, 2014 2:42 am

I have a boilermate 2000 and the other day noticed the pump is constantly running and circulating stored water through the boiler (Baxi solo 3) all 3 pumps are set to maximum speed setting and boiler thermostat on full. The stored temp readout on the display last night was 72 degrees (which I would of thought is plenty to shut off) yet keeps running and demanding more heat. I have viewed a few threads regarding this problem and looks like I have a pcb fault. Just wanted to double check before I fork out for a new one. Is there a way to single out the fault being a thermal sensor telling the pcb the water is cooler than actual or is 72 degrees plenty to shut down? Any help would be appreciated.

Thanks.

Gary Faulkner

Posts : 4
Join date : 2014-02-03

View user profile

Back to top Go down

Re: Boilermate 2000 constantly circulating and demanding heat

Post  Geths on Mon Feb 03, 2014 2:55 am

You're probably better posting your questions in  http://gledhill-repairs.forumotion.net/f8-boilermate-2000 which is a forum dedicated to your boiler. You've posted in the engineer advertising forum..

best of luck


Last edited by Geths on Mon Feb 03, 2014 3:18 am; edited 1 time in total

Geths

Posts : 14
Join date : 2010-11-24

View user profile

Back to top Go down

Re: Boilermate 2000 constantly circulating and demanding heat

Post  Gary Faulkner on Mon Feb 03, 2014 3:05 am

Oops. I'm new thank you.

Gary Faulkner

Posts : 4
Join date : 2014-02-03

View user profile

Back to top Go down

Re: Boilermate 2000 constantly circulating and demanding heat

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum