Electramate 2000 9kw - No Heat or Hot Water
Page 1 of 1
Electramate 2000 9kw - No Heat or Hot Water
We have a customer with a 9KW EM2000, we when out unit had power but no Heat or H/W. Traced out and found, R/H/S relay not switching also elements metered out open circuit.
So we have changed the relay and the elements, all back on heating up and plenty of H/W.
3 days later client called to say not hot water or heating again we returned to site and found EM2000 had no power, MCB on board tripped. Reset MCB, unit powered up and started heating the store, after a few minutes we had some hot water coming through.
The following morning client call to say not hot water or heating this morning. We have just returned again to find unit has power and is on by water is cold and the relay does not seem to be getting a switch current to not putting power to elements.
Any ideas ?
Thanks
Dominic
So we have changed the relay and the elements, all back on heating up and plenty of H/W.
3 days later client called to say not hot water or heating again we returned to site and found EM2000 had no power, MCB on board tripped. Reset MCB, unit powered up and started heating the store, after a few minutes we had some hot water coming through.
The following morning client call to say not hot water or heating this morning. We have just returned again to find unit has power and is on by water is cold and the relay does not seem to be getting a switch current to not putting power to elements.
Any ideas ?
Thanks
Dominic
EPML- Posts : 1
Join date : 2017-03-16
Similar topics
» Electramate 2000 - No Hot Water!
» Electramate 2000 - No Heating & No Hot Water
» Electramate 2000 hot water problem
» Electramate 2000 Hot Water Problem.
» Electramate 2000 no heating or hot water
» Electramate 2000 - No Heating & No Hot Water
» Electramate 2000 hot water problem
» Electramate 2000 Hot Water Problem.
» Electramate 2000 no heating or hot water
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum