Lack of Pressure

View previous topic View next topic Go down

Lack of Pressure

Post  hughsie on Sun Sep 06, 2009 1:25 pm

The mixer tap linked to our Boilermate has failed a number of times and been replaced, we were eventually told that the reason for the failure was the system was running too hot. We have turned the temperature gauge down and since than there have been no problems with the mixer tap. However, now the water pressure has fallen. Does anyone have any ideas how we can improve the water pressure?

hughsie

Posts : 1
Join date : 2009-09-06

View user profile

Back to top Go down

Re: Lack of Pressure

Post  Mike the Boilerman on Fri Sep 18, 2009 1:35 am

Hi Hughsie,

How is the pressure at your cold taps? If it is good, your boilermate either needs descaling or the blender valve replacing. (Neither is an easy DIY job.)

If cold pressure is poor too, the problem is nothing to do with the Boilermate, and to do with the water supply into the house.

Hope that helps.

Cheers, Mike

Mike the Boilerman
Admin

Posts : 426
Join date : 2009-01-08

View user profile http://gledhill-repairs.forumotion.net

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum