Pulsa Coil 3.. poor water regulater

Go down

Pulsa Coil 3.. poor water regulater

Post  Flat Man on Mon Nov 02, 2009 2:24 pm

Hi Mike.. have a problem with my Pulsacoil 3.. the water seems to get really hot.. poor regulating.
The green lights on the front come on& the water level one stays on ..but the overheat one keep going off untill the reset button is depressed, then will stay on for 2 days before going off again.
Recently the switch blew which was replaced & now seems to be working fine.
Any idea's.
Thanks iin advance.
Flat Man

Flat Man

Posts : 1
Join date : 2009-11-02

View user profile

Back to top Go down

Re: Pulsa Coil 3.. poor water regulater

Post  Mike the Boilerman on Sun Nov 08, 2009 3:02 pm

Hi Flat Man,

Yes. One or both of the thermostats in the heaters has stopped working. Fit new, dual-function thermostats and bridge out the old overheat 'stat.

You may find the old stat(s) are wet when you take them out. If so you'll need to replace the heater elements too as they are leaking as this will be the cause of the 'stat failure.

Cheers, Mike

Mike the Boilerman

Posts : 426
Join date : 2009-01-08

View user profile http://gledhill-repairs.forumotion.net

Back to top Go down

The stat product number

Post  sunny.sahdev on Tue Sep 10, 2013 5:23 am

XB114 is the product number for the correct thermostat. You can buy them on line via this link: Gledhill Pulsacoil 3 Spares


Posts : 383
Join date : 2013-08-21
Age : 32
Location : Vedhas Limited, 960 Capability Green

View user profile http://www.vedhas.co.uk/vedhas-what-we-do/pulsacoil-repair/#

Back to top Go down

Re: Pulsa Coil 3.. poor water regulater

Post  Sponsored content

Sponsored content

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum