jumpers boilermate 2000

View previous topic View next topic Go down

jumpers boilermate 2000

Post  salbar on Wed Jan 28, 2009 12:50 pm

Just had my ideal classic boiler serviced.
Heating engineer has quick check on boilermate & noted backup electrical fuses had not been pushed and jumpers were missing..only 1 in position 4...system been like this for 6 years since i moved into the property
Can you advise on where I can purchase jumpers and the spec I require....had a quick look on keep the heat on where I purchased a DHW sensor before xmas but could not locate jumpers

salbar

Posts : 1
Join date : 2009-01-28

View user profile

Back to top Go down

Re: jumpers boilermate 2000

Post  Mike the Boilerman on Wed Jan 28, 2009 2:53 pm

Hi salbar,

Observant of him to notice this!

The BM2000 needs jumpers on J1, J3 and J4. You can probably get them from the chap at http://www.segel.co.uk/

Cheers, Mike




salbar wrote:Just had my ideal classic boiler serviced.
Heating engineer has quick check on boilermate & noted backup electrical fuses had not been pushed and jumpers were missing..only 1 in position 4...system been like this for 6 years since i moved into the property
Can you advise on where I can purchase jumpers and the spec I require....had a quick look on keep the heat on where I purchased a DHW sensor before xmas but could not locate jumpers

Mike the Boilerman
Admin

Posts : 426
Join date : 2009-01-08

View user profile http://gledhill-repairs.forumotion.net

Back to top Go down

Jumpers

Post  chriscollard on Fri Oct 19, 2012 9:30 am

Just been getting my head around the 2000 system. Everything is functioning correctly, managed to get the ciculation pump to shut down now I have turhined up the boiler temp. One puzzle as per the previous post. Everything functioning correctly but there is only one jumperinstalled in slot 4. Nothing in slots 1 and 3. Should i be worried?

chriscollard

Posts : 4
Join date : 2012-09-20

View user profile

Back to top Go down

Re: jumpers boilermate 2000

Post  Mario.S on Fri Oct 19, 2012 9:47 am

chriscollard wrote:Just been getting my head around the 2000 system. Everything is functioning correctly, managed to get the ciculation pump to shut down now I have turhined up the boiler temp. One puzzle as per the previous post. Everything functioning correctly but there is only one jumper installed in slot 4. Nothing in slots 1 and 3. Should i be worried?
With only 1 jumper in, your pcb is running on a basic modification , so not to the full efficiency as it could, also jumper , you will also get them in any Computer repair shop ( for jumpering hard drives on pc's) for pence( may a £1 for a pack of 10 or so)
regards Mario at Marios Boiler Service, Hampshire

Mario.S

Posts : 224
Join date : 2011-12-10
Location : Fareham / Hampshire

View user profile http://www.marios-boiler-service.co.uk/

Back to top Go down

Jumpers

Post  chriscollard on Fri Oct 19, 2012 12:34 pm


That's brilliant. Thanks for information. Just bugs me that people get away with installing stuff incorrectly in the first place. I'm no plumber but I can still read a manual. Just hope the jumpers haven't been missed out to bypass another problem which I don't know about yet!!

chriscollard

Posts : 4
Join date : 2012-09-20

View user profile

Back to top Go down

Re: jumpers boilermate 2000

Post  Midland Boilercare on Sat Oct 20, 2012 2:35 am

Both of these unit must have had a replacement pcb at some point, as Gledhill would have assembled the Boilermate in the factory and set the jumpers accordingly.
When a replacement pcb is installed afterwards, they are only supplied with jumper 4 fitted as the GT155 covers a number of different models and should be configured individually everytime one is replaced.

I know this doesn't alter the situation that you have come across, but I just thought it might put your mind at rest.
avatar
Midland Boilercare

Posts : 142
Join date : 2009-07-15

View user profile http://www.midlandboilercare.co.uk

Back to top Go down

Re: jumpers boilermate 2000

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum