New pump and PSC board, system working, pump constantly buzzing ?

View previous topic View next topic Go down

New pump and PSC board, system working, pump constantly buzzing ?

Post  bobtv on Mon Feb 01, 2010 7:35 am

Hi Mike,
Thanks for your help, system working fine, apart from the pump is always buzzing ?
Same as before fitting new PSC board, so old one probably Ok, good spare though :-).
I fitted new grundfos 15/50. (not the gledhill one, a bog standard one) is this the problem ?
Pump works fine when system calls for water
Bob

bobtv

Posts : 5
Join date : 2009-11-01

View user profile

Back to top Go down

Sorted it !

Post  bobtv on Tue Feb 02, 2010 11:48 am

The e7 supply had previously tripped due to a unrelated electrical problem.
so when i restored power the store was cold, resulting in the pump rotating slowly, even when there was no call for water.
This morning, after normal e7 overnight heat up, pump operates normally, when hot water call finishes, after 20 seconds or so stops.
Buzzing was the pump operating at reduced voltage/speed i presume.
silence !

Bob

bobtv

Posts : 5
Join date : 2009-11-01

View user profile

Back to top Go down

Re: New pump and PSC board, system working, pump constantly buzzing ?

Post  LeicesterNige on Thu Sep 02, 2010 6:20 am

Is it normal for the pump/ board to buzz after use of hot water? Mine does for about a minute whenever I run a tap.

LeicesterNige

Posts : 2
Join date : 2010-09-02

View user profile

Back to top Go down

Re: New pump and PSC board, system working, pump constantly buzzing ?

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum