DHW pump over-run

View previous topic View next topic Go down

DHW pump over-run

Post  stevie b on Fri Dec 31, 2010 1:19 am

Hi
first may I say what a great forum...
My SyteMate III is coming up to 10 years old and had been fairly reliable. Recently, after running the hot water tap, the DHW pump continues to run and will only switch off when I turn the HW tap on/off a few times. I suspect the flow switch, however I would appreciate any advice? - Steve

stevie b

Posts : 2
Join date : 2010-12-31

View user profile

Back to top Go down

Re: DHW pump over-run

Post  mike on Fri Feb 18, 2011 1:24 am

Flow switch.
Sensors
PCB
But as it stops when the tap is turned on and off a few times points to the flow switch.
They are my thoughts with out being in front of the unit.
But you have posted that you have sorted it out.
Was it any of the above?
Or something weird and wonderful ( when found the fault is always wonderful ! )
Mike
MGC/H2O
Norfolk


mike

Posts : 1674
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum