Filling via the open vent

View previous topic View next topic Go down

Filling via the open vent

Post  andrewn on Sat Jan 08, 2011 8:33 pm

I had the problem of no hot water but green light on and red LED light flashing normally, but feeder tank was empty. Filled feeder tank but still no hot water. I noticed in another thread that someone suggested filling via the open vent - which i did and i now have hot water. Thank you for that

But i have two questions:

1) How do i know how far/long to keep on pouring water in the open vent?

2) I am guessing that the fact i needed to fill via the open vent suggests that the feeder tank is not somehow blocked from doing its normal operation and therefore i need to top up via the open vent from here on in?

andrewn

andrewn

Posts : 1
Join date : 2011-01-08

View user profile

Back to top Go down

Re: Filling via the open vent

Post  mike on Sun Jan 09, 2011 2:53 pm

You could try putting some sludge remove down the cold feed

mike

Posts : 1626
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Sludge remover

Post  sunny.sahdev on Fri Sep 13, 2013 9:35 am

I agree with Mike, try using some sludge remover which helps in most cases.

sunny.sahdev

Posts : 383
Join date : 2013-08-21
Age : 31
Location : Vedhas Limited, 960 Capability Green

View user profile http://www.vedhas.co.uk/vedhas-what-we-do/pulsacoil-repair/#

Back to top Go down

Re: Filling via the open vent

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum