Gledhill Repairs
Would you like to react to this message? Create an account in a few clicks or log in to continue.

How to set controls for a PulsaCoil

2 posters

Go down

How to set controls for a PulsaCoil Empty How to set controls for a PulsaCoil

Post  BenGarratt Tue Jul 19, 2011 3:37 am

Hi,

I have a Pulsacoil heater, a Creda Flash Programmer 2s control, and an economy seven electricity tariff.

1) Is this set-up compatible?
2) The temperature control has two setting categories - c1 and c2 - would this relate to the two tariffs, or heating/hot water?
3) What settings should I set each category to, for hot showers in the morning?

At the moment I am pressing the boost button the Pulsacoil itself in the morning - but this seems inefficient

Thanks

Ben

BenGarratt

Posts : 3
Join date : 2011-07-19

Back to top Go down

How to set controls for a PulsaCoil Empty Re: How to set controls for a PulsaCoil

Post  MK Group Ltd Tue Jul 19, 2011 5:49 am

Hi Ben,

The Creda Flash is a two zone heating programmer and is compatible with economy seven tariff, I'm not sure how your system is wired but usually it would only be for the PulsaCoil not the heating.


I would suggest you get hold of a manual for the time clock and set it for 12 - 6.30 pm this will coincide with economy seven,

Kind regards

Gary

MK Group Ltd
MK Group Ltd
MK Group Ltd

Posts : 301
Join date : 2010-04-03

http://www.mkgroupltd.co.uk

Back to top Go down

How to set controls for a PulsaCoil Empty Re: How to set controls for a PulsaCoil

Post  BenGarratt Tue Jul 19, 2011 5:50 am

Thank you - ill try that out

Ben

BenGarratt

Posts : 3
Join date : 2011-07-19

Back to top Go down

How to set controls for a PulsaCoil Empty Re: How to set controls for a PulsaCoil

Post  BenGarratt Thu Jul 21, 2011 11:43 am

Apologies if this is a stupid question, but I thought Economy 7 was cheaper at night.
Would it therefore not be better to set the timer to come on 12-6.30AM, not PM?

Best,

Ben

BenGarratt

Posts : 3
Join date : 2011-07-19

Back to top Go down

How to set controls for a PulsaCoil Empty Re: How to set controls for a PulsaCoil

Post  MK Group Ltd Thu Jul 21, 2011 11:51 am

Ben,

Sorry typo, it should be am!

Regards

Gary
MK Group Ltd
MK Group Ltd

Posts : 301
Join date : 2010-04-03

http://www.mkgroupltd.co.uk

Back to top Go down

How to set controls for a PulsaCoil Empty Re: How to set controls for a PulsaCoil

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum