NO NOT WATER
3 posters
Page 1 of 1
NO NOT WATER
I have a Glenhill Pulsacoil 2000. There is no hot water. Both LED lights are off. Any advice would be helpful. Thank you. Now called a plumber and both elements have gone. Will be repaired. Thanks
Last edited by Algwars on Fri Oct 14, 2011 1:28 pm; edited 1 time in total
Algwars- Posts : 1
Join date : 2011-10-10
Re: NO NOT WATER
Is the store hot? If you take the front panel off is the red led flashing on the PCB board?
Gary
MK Group Ltd
Gary
MK Group Ltd
Number of problems could be causing this
There are a number of problems causing this. I would recommend you confirm the system is being used correctly. You can request a self check guide which should help via this link: Pulsacoil 2000
Most likely both elements have gone but have the plumber check the thermostat rods in case they are the only points which have failed
Most likely both elements have gone but have the plumber check the thermostat rods in case they are the only points which have failed
Similar topics
» No hot water, red fault light on, after adjusting thermostat
» Gledhill Boilermate Class A OV - PHE (hot water) pump constantly whirring, but no hot water
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» Poss reason for no hot water - Check the water level at the top of the unit
» Gledhill Boilermate Class A OV - PHE (hot water) pump constantly whirring, but no hot water
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» Poss reason for no hot water - Check the water level at the top of the unit
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|