Gledhill Repairs
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Can I fit a room thermostat?

2 posters

Go down

Can I fit a room thermostat? Empty Can I fit a room thermostat?

Post  linstan3 Fri Dec 16, 2011 2:28 am

Please bear with me, I'm new to this forum

Bought a Wimpey house (daft I know) and we have a Boilermate 2000 with s mechanical clock. All the rads have thermostatic valves but there is no room thermostat in the house. This leaves us the choice of either having all the rads on and using the clock to turn heat on or off or doing each rad individually.

My question is, can I add a wireless room thermostat into the system, and if so, how and where do I wire in the receiver

Thanks for your help

linstan3

Posts : 3
Join date : 2011-12-16

Back to top Go down

Can I fit a room thermostat? Empty Re: Can I fit a room thermostat?

Post  mike Fri Dec 16, 2011 8:47 am

Yes you can.
And if you down load the book from Gledhill website (free)
It will tell you how.
I would recommend a Honeywell wireless stat.
Bit more moey but I find all Honeywell stuff good.
You will need a piece of 5 core heat resistant flex.
From the Boilermate 2000 to the receiver box.
You will have;
Live; Brown
Neutral; Blue
Stat wire; Grey
Stat wire; Black
Earth.; Green and yellow.
If in doubt get a good electrician and give him the book on the BM2000.
After fitting you can leave the clock on the BM 2000 onconstant.
And programme the heating from the stat.
Mike
MGC/H2O
Norfolk

mike

Posts : 1747
Join date : 2009-10-08
Age : 70
Location : Norwich

http://www.mgch20.co.uk

Back to top Go down

Can I fit a room thermostat? Empty Cheers Mike

Post  linstan3 Fri Dec 16, 2011 9:12 am

I have this stat ECO ET3 RF

How do I wire this, I can see connections on the bottom of the master board labelled thermostat but the downloaded manual is unclear and I need your expert advice

Cheers

linstan3

Posts : 3
Join date : 2011-12-16

Back to top Go down

Can I fit a room thermostat? Empty Re: Can I fit a room thermostat?

Post  linstan3 Sat Dec 17, 2011 4:13 am

After a night of thinking about the logic I connected to the terminal block as per the instructions on the stat and the boilermate.

ha, it's done, working and a nice warm lounge

Thanks for the help Mike, you made me work it out

linstan3

Posts : 3
Join date : 2011-12-16

Back to top Go down

Can I fit a room thermostat? Empty Re: Can I fit a room thermostat?

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum