Electramate 2000 Hot Water Problem.
2 posters
Page 1 of 1
Electramate 2000 Hot Water Problem.
I have the Electramate 2000, unsure whether it is the 9kw/12kw model.
This might help a few people with the same fault symptoms!
With hot tap turned on T2 and T3 temps on LCD Display both dropped from roughly 60 to about 20 degrees, resulting in about 30 secs worth of hot water.
Had a quick nosey at the DHW pump and there is a switch on it, it was set to I. Looked at the other 2 pumps and they are both set to III. Changed the DHW pump to III and left system! Checked the hot water half hour later and it is now running perfectly and is consistently hot. Happy Days fingers crossed!
Do any experts know if changing the DHW pump setting will have any effects on the system? Should i be running it on setting III or will this cause problems?
Thanks
Mac.
This might help a few people with the same fault symptoms!
With hot tap turned on T2 and T3 temps on LCD Display both dropped from roughly 60 to about 20 degrees, resulting in about 30 secs worth of hot water.
Had a quick nosey at the DHW pump and there is a switch on it, it was set to I. Looked at the other 2 pumps and they are both set to III. Changed the DHW pump to III and left system! Checked the hot water half hour later and it is now running perfectly and is consistently hot. Happy Days fingers crossed!
Do any experts know if changing the DHW pump setting will have any effects on the system? Should i be running it on setting III or will this cause problems?
Thanks
Mac.
macvicar1979- Posts : 2
Join date : 2011-10-16
Re: Electramate 2000 Hot Water Problem.
Hi Mac,
It is fine to run the pump on speed setting 3, it just means that the pump is running faster and drawing water through the plate heat exchanger at a quicker rate.
Kind regards
Gary
MK Group Ltd
It is fine to run the pump on speed setting 3, it just means that the pump is running faster and drawing water through the plate heat exchanger at a quicker rate.
Kind regards
Gary
MK Group Ltd
Re: Electramate 2000 Hot Water Problem.
Thanks Gary.
Do you know if that is a common fix for the hot water problem or have i just been lucky when testing the hot tap?
Regards,
Mac.
Do you know if that is a common fix for the hot water problem or have i just been lucky when testing the hot tap?
Regards,
Mac.
macvicar1979- Posts : 2
Join date : 2011-10-16
Re: Electramate 2000 Hot Water Problem.
You have been lucky, usually the symptoms you have had point to the DHW sensor requiring replacement.
Kind regards
Gary
MK Group Ltd
Kind regards
Gary
MK Group Ltd
Similar topics
» Electramate 2000 hot water problem
» Electramate 2000 - No Hot Water!
» Electramate 2000 no heating or hot water
» Electramate 2000 12kw no hot water
» Electramate 2000 - No Heating & No Hot Water
» Electramate 2000 - No Hot Water!
» Electramate 2000 no heating or hot water
» Electramate 2000 12kw no hot water
» Electramate 2000 - No Heating & No Hot Water
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum