No Hot Water Pulsalcoil 2000
3 posters
Page 1 of 1
No Hot Water Pulsalcoil 2000
Our tenant reports no hot water. Green neon is on and there is heat within the unit. Pump can be rotated with small screwdriver when cap removed. Red LED flashes twice every second. All mains switches are on and header tank full.
Any advice would be appreciated. An electrician is going to have a look for me.
Where can I find a competent engineer to repair (Lancaster).
Any advice would be appreciated. An electrician is going to have a look for me.
Where can I find a competent engineer to repair (Lancaster).
gilbertcat- Posts : 1
Join date : 2009-03-16
Re: No Hot Water Pulsalcoil 2000
Is the unit hot or cold?
If hot, then this will be sensor failure probably. If cold, then something is wrong with the heaters.
Cheers, Mike
If hot, then this will be sensor failure probably. If cold, then something is wrong with the heaters.
Cheers, Mike
Pump rotating with small screwdriver?
You have said the pump can rotate using a small screwdriver. Is it rotating without using a screwdriver whilst it is receiving voltage greater than 50V? If not the pump is faulty. Also this does not mean the sensors are fine.
Similar topics
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Pulsacoil 2000, 5 secs hot water, 5 secs cold water then in a constant loop?
» Pulsacoil 2000 - No hot Water
» Pulsacoil 2000 - no hot water, everything looks ok!!
» Not hot water from Pulsacoil 2000
» Pulsacoil 2000, 5 secs hot water, 5 secs cold water then in a constant loop?
» Pulsacoil 2000 - No hot Water
» Pulsacoil 2000 - no hot water, everything looks ok!!
» Not hot water from Pulsacoil 2000
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum