Strange Boilermate problem, screen keeps freezing?

View previous topic View next topic Go down

Strange Boilermate problem, screen keeps freezing?

Post  Samtheman1k on Sat Sep 18, 2010 2:49 pm

Hello all!

I'm hoping that someone can shed some light in an 'issue' with my boliermate HP DEM??? It is kind of hard to explain, but fairly frequently, the whole thing, including the display seems to freeze, and just continues in whatever mode it is stuck in. If I turn the boilermate on, it will work for a good few hours as it should. But then I check the temperatures on the display and all the numbers seem stuck and it shows a water temperature of, say, 60 deg, but really it has dropped much lower (due to use).

I can turn it off and on again, and it is fine for a few more hours. I can navigate the menu, but all the sensor temps don't change. If one of the pumps was running when it froze, then they keep running, even though the heat pump boiler has stopped producing heat.

Any ideas???

Thanks!

Samtheman1k

Posts : 1
Join date : 2010-09-18

View user profile

Back to top Go down

Re: Strange Boilermate problem, screen keeps freezing?

Post  mike on Wed Sep 29, 2010 10:28 am

Have you checked the fault codes?
But I would think that the main PCB has failed.
Mike

mike

Posts : 1577
Join date : 2009-10-08
Age : 63
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum