electramate 2000 12kw, nightmare!
2 posters
Page 1 of 1
electramate 2000 12kw, nightmare!
i'm a pretty competent engineer (not good looking pretty), got a call out to the above mentioned boiler which i have repaired in the past, the problems where, earth fault to heater (element broken), heater pump fault, various leaks! poxy thing. ok changed the leaking / broken heater, the heater circ pump, pcb. heater circ pump not working still, boiler is cold and all the sensor readings are low, so i assume they work ok, im not getting any voltage between a1 - a2 of relays t2, t3,t4, think that is right as the manual which i have got in front of me is totally different wiring config. spoke to gledhill before i changed heater, pcb and pump , they didnt have a clue???? they also recommended i put an mip068 retro fit kit in to replace the relays? they sent with this retro kit a 9kw boiler wiring diagram and said it was the same for the 12kw??? the 12kw has 3 elements the 9kw has 2 elements so really struggling to work this out, i think when the heater or pump went it has also taken out a relay or two, also what i think are the relays are made by hagar, which from previous experience are really s*** on the consumer unit side of things. the rest of the relays / contactors are schneder. anyone have any idea? it would be much appreciated.
Tght lines.
Tght lines.
Re: electramate 2000 12kw, nightmare!
Hi
2x 4.5Kw elements
1 x 3Kw element
Any help !
Have you got this book
http://www.gledhill-response.net/documents/EM2000-12kw-Iss3.pdf
Mike
MGC/H2O
Norfolk.
2x 4.5Kw elements
1 x 3Kw element
Any help !
Have you got this book
http://www.gledhill-response.net/documents/EM2000-12kw-Iss3.pdf
Mike
MGC/H2O
Norfolk.
Re: electramate 2000 12kw, nightmare!
yes got it now, cheers, mike have you ever wired in the retro fit kit to replace the relays on the 12kw model? if dont suppose you know of where i can get the new wiring diagram for said relay wiring?
cheers
cheers
Re: electramate 2000 12kw, nightmare!
It should come with all the info you need.
Pictures and words!
If not try South Coast Green Energies.
http://www.segel.co.uk/
They may help you.
Or call Gledhill spares and ask them to email them.
Mike
MGC/H2O
Norfolk
Pictures and words!
If not try South Coast Green Energies.
http://www.segel.co.uk/
They may help you.
Or call Gledhill spares and ask them to email them.
Mike
MGC/H2O
Norfolk
Re: electramate 2000 12kw, nightmare!
got one off gledhill, who are sending it with yet more spares!!! one of the incoming 63amp contactors has started to melt probably due to either the fault with the heater? or a loose contact, have you had any experience with these melting? this is literally the second of these electramates i have worked on. have you ever replaced an electramate if so what with? by the way ordered the part last thursday spoke to gledhill today and at first they told me it was posted thursday, then rang me about 2 hrs later to tell me they are waiting for a part and not sent my order, very angry customers! thanks gledhill for letting me know when i ordered them!
Re: electramate 2000 12kw, nightmare!
got this all working again on thursday, even the heating which has not worked since tennants moved in 3 years ago, got a call this morn to say no hot water again and the heater stat has tripped! wtf! can these get blocked up with anything on the thermal store side? its a new heater, new heater pump, new pcb, new stat. any ideas? will phone gledhill tomoz and let everyone know what they say.
Similar topics
» Electramate 2000 12kw no hot water
» Electramte 2000
» How To Turn Off Hot Water to Shower - Electromate 2000 12KW
» electramate 2000
» Electramate 2000 9kW
» Electramte 2000
» How To Turn Off Hot Water to Shower - Electromate 2000 12KW
» electramate 2000
» Electramate 2000 9kW
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|