Flushing out a BM 2
3 posters
Page 1 of 1
Flushing out a BM 2
Can anyone give some advice on flushing out a boilermate 2?
I'd like to flush out the primary circuit to ensure I have no flow restrictions to and from the boiler - any suggestions?
Andy
I'd like to flush out the primary circuit to ensure I have no flow restrictions to and from the boiler - any suggestions?
Andy
aweight- Posts : 7
Join date : 2010-01-31
Re: Flushing out a BM 2
Drain the unit / system.
Diconnect boiler pipes at unit or boiler end and flush.
Are the drain off on the boiler flow and return?
Drain from there.
Do not power flush the unit
Diconnect boiler pipes at unit or boiler end and flush.
Are the drain off on the boiler flow and return?
Drain from there.
Do not power flush the unit
Re: Flushing out a BM 2
hi mike why do not flush unit?(boilermate)
geetee50- Posts : 4
Join date : 2010-08-13
Similar topics
» boilermate 3 & whether powerflushing is recommended by the manufacturer???
» removing heat exchanger on boiler mate 2
» removing heat exchanger on boiler mate 2
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|