DIGITAL CLOCK PROGRAMMER

View previous topic View next topic Go down

DIGITAL CLOCK PROGRAMMER

Post  seandev on Mon Jan 03, 2011 1:25 pm

Hi Mike,

Have purchased a Grasslin digital clock from Ebay, was looking at replacing my mechanical clock for this one.
Question - 1. Is it straight forward to do ie connections like for like?.
2. or am i better just keeping my mechanical clock which works fine?.
Any advice please.

Sean.

seandev

Posts : 15
Join date : 2011-01-01

View user profile

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  mike on Mon Jan 03, 2011 3:49 pm

should be straight forward

mike

Posts : 1646
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Is Grasslin controller neccessary?

Post  Phillip on Tue Jan 04, 2011 6:39 am

Hi,
I've also been looking into replacing the analogue timeclock on my BM2000, and was wondering whether there was any reason you had to use the Grasslin xb216 controller listed in the manual, or whether any single-channel 7-day digital controller would be OK?

we have a BM2000 running on a potterton suprima gas boiler.

The reason being, the Grasslin one seems quite expensive for what it is - nearly double the price of lots of others. What I really want to be able to do is boost the heating for an extra time or advance it so it'll stay on until the next designated switching in the standard programme, which the analogue one won't do.

Obviously the advantage of the Grasslin one is that it fits in the hole in the front plate and connects the same way, but otherwise is there any reason why it has to be that one?

Any advice would be great,
Thanks,
Phillip

Phillip

Posts : 1
Join date : 2011-01-04

View user profile

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  seandev on Tue Jan 04, 2011 1:39 pm

Hi Philip,

I got the Grasslin digital clock on E-Bay for about £20 as new as for fitting it do not have a clue mate so any advice / instructions would be helpfull.

Sean.

seandev

Posts : 15
Join date : 2011-01-01

View user profile

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  mike on Tue Jan 04, 2011 4:28 pm

Another way is to leave the clock in on constant.
And fit a programmable room stat

mike

Posts : 1646
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  seandev on Mon Jan 10, 2011 2:37 am

Update folks have now replaced my old Mechanical clock with new Digital clock, simply like for like connections however got no user instructions with new one getting there mind.

Sean.

seandev

Posts : 15
Join date : 2011-01-01

View user profile

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  mike on Mon Jan 10, 2011 3:04 am

Go on Google
Type in pdf then the make of clock, may come up with instructions
Mike

mike

Posts : 1646
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  seandev on Mon Jan 10, 2011 4:20 am

Have done mike i got the old digi clock XB216 now been replaced found a clock with similiar instructions FM / 20 digi .

Sean.

seandev

Posts : 15
Join date : 2011-01-01

View user profile

Back to top Go down

Re: DIGITAL CLOCK PROGRAMMER

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum