Danfoss HS3 valve leaking
2 posters
Page 1 of 1
Danfoss HS3 valve leaking
Baz Sat May 03, 2014 5:20 am
Hi,
I've noticed the Danfoss HS3 valve on my Boilermate A-class SP is leaking and the actuator is making a clicking noise so I think that's going too. Is this a complicated job? In my head these are the steps:
1. Kill power.
2. Drain system. (Is this necessary?)
3. Unscrew old valve + actuator.
4. Replace with new vale + actuator.
5. Wire up new actuator.
6. Refill system by expansion tank.
7. Power on.
Does this sound right?
I've noticed the Danfoss HS3 valve on my Boilermate A-class SP is leaking and the actuator is making a clicking noise so I think that's going too. Is this a complicated job? In my head these are the steps:
1. Kill power.
2. Drain system. (Is this necessary?)
3. Unscrew old valve + actuator.
4. Replace with new vale + actuator.
5. Wire up new actuator.
6. Refill system by expansion tank.
7. Power on.
Does this sound right?
Baz- Posts : 7
Join date : 2013-10-27
mike- Posts : 1747
Join date : 2009-10-08
Age : 71
Location : Norwich -
Similar topics» Boilermate SP Bypass Valve Leaking
» Heating Bypass Valve leaking
» Leaking Cylinder?
» leaking boilermate2
» Leaking of water
» Heating Bypass Valve leaking
» Leaking Cylinder?
» leaking boilermate2
» Leaking of water
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|