How to Drain down and re-fill Boilermate 2000

View previous topic View next topic Go down

How to Drain down and re-fill Boilermate 2000

Post  dirtbiker3 on Thu Aug 09, 2012 8:11 am

Hi,

I have a boilermate 2000 fitted which i would like to add some system cleaner into(via radiator or F/E tank), then run it for a few days and drain off.

Could someone give a 'how to' on the best methods / practice to achieve this and also the re-filling methods.

The reason for me doing this is that i have had a few leaks on the system. Mainly the DHW pump union is worse but also the CH pump union is leaking so some of the inhibitor that was originally in the system has now leaked through my ceiling. After cleaning i will add some inhibitor back to the CH system.

On another note is it common for the copper pipe to pump connections to leak? Do these seals deteriorate after time?

Thanks in advance for any comments.

dirtbiker3

Posts : 1
Join date : 2012-08-09

View user profile

Back to top Go down

Re: How to Drain down and re-fill Boilermate 2000

Post  mike on Fri Aug 10, 2012 4:22 pm

If you are now going to clean your system.
And sort out the various leaks etc.
The manual will tell you how to re commission it again.
Mike

mike

Posts : 1626
Join date : 2009-10-08
Age : 64
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum