PC2000 - everything seems ok but no hot water in afternoon
3 posters
Page 1 of 1
PC2000 - everything seems ok but no hot water in afternoon
Hi, my PC2000 seems to be working fine, the pump works, both heating elements work, and the Pump Speed Control PCB seems to be fine (if I decrease the hot water flow rate from a tap the pump slows down). However, once the heat stored off peak finishes there is no more hot water. Sometimes it randomly comes back, but there doesn't seem to be a set 'pattern' for this. Any suggestions?
Thanks
Riccardo
Thanks
Riccardo
Rickyf26- Posts : 1
Join date : 2013-05-22
Re: PC2000 - everything seems ok but no hot water in afternoon
Check the stats.
Even try swapping them over.
Mike
Even try swapping them over.
Mike
It could also be a sensor issue
I have come across the situation a few times, I do agree with Mike, check the stat, if that is fine it could be 1 element is faulty or the PHE/DHW sensors are not working 100%.
Similar topics
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» No hot water in afternoon
» Water gets heated at night but no heating in the afternoon or evening
» pc2000 overheating?
» Gledhill Boilermate Class A OV - PHE (hot water) pump constantly whirring, but no hot water
» No hot water in afternoon
» Water gets heated at night but no heating in the afternoon or evening
» pc2000 overheating?
» Gledhill Boilermate Class A OV - PHE (hot water) pump constantly whirring, but no hot water
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum