boilermate 210 malfunction

View previous topic View next topic Go down

boilermate 210 malfunction

Post  bazza on Mon Jul 29, 2013 12:43 pm

I have a boilermate 210 hp-dem that was drained down when bought it of ebay and has it has been empty some time. I got the design installation service instruction from the net. I did all that was stated regarding do's and dont's and every thing worked fine until i switched on mcb 1. there was a pot.
question why is there warning about mcb 1/2 not being switched on until full tested and comminisoned?

the following are my current situation
1, no lights or info on the display or appliance control board. no other functions work,
2, power to clock ok
3, 100mA fuse ok

any ideas and what fault finding can i do to find out which componets has gone? As my email to gledhill did not give me the answers i wanted.

I am (scientist) so not a plumber or electrication by trade , but have done a great deal of complex diy and can work out most problems over time.

thanks

bazza

bazza

Posts : 4
Join date : 2013-07-29
Location : surrey

View user profile

Back to top Go down

Re: boilermate 210 malfunction

Post  mike on Wed Jul 31, 2013 1:13 pm

Have you a Boilermate 2000
Or a Boiler mate A class?
The reason you must not put the fuses / breakers "on"
Because of dry firing,
Unit not full.
Also if bought second hand there could be all sorts of problems.
More so if drained / empty for a long time.
Power to the main ACB or PCB ?
Mike

mike

Posts : 1577
Join date : 2009-10-08
Age : 63
Location : Norwich

View user profile http://www.mgch20.co.uk

Back to top Go down

bm 210 a class

Post  bazza on Thu Aug 01, 2013 3:50 am

hi mike

I did have it all running fine until i throw the switch.
How do i test if it is the acb or pcb?

using a test meter i have low voltage o.4 volts at j31, I think this should b 12v
I am testing further points today so i will give more info later.

thanks
bazza


bazza

Posts : 4
Join date : 2013-07-29
Location : surrey

View user profile

Back to top Go down

nearly there

Post  bazza on Mon Aug 05, 2013 5:51 am

Mike et al

Did a lot of testing etc over the past few days.
I can get the temps etc when I press the select button.
Still have a problem with inizalization, I now get in the display window fault 2
Gledhiull just passed me over to mitsibusy (great help line)
Mitsibusy have not replied so far

Any ideas of what I cab do?

I live in Frimley j4 M3 so mike I may your home visit

ta bazza

bazza

Posts : 4
Join date : 2013-07-29
Location : surrey

View user profile

Back to top Go down

Re: boilermate 210 malfunction

Post  Sponsored content Today at 1:56 pm


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum