No hot water from my PulsaCoil A CLass
2 posters
Page 1 of 1
No hot water from my PulsaCoil A CLass
I dont seem to be getting any hot water from my unit when i have it set on the timer. The timer is working and going round ok. It is also set with the correct time.
If i turn the timer off, and you the boost button, i will get hot water an hour later.
I have checked the small filler tank on top of the unit and this was low on water but i have now filled this up.
Any ideas?
If i turn the timer off, and you the boost button, i will get hot water an hour later.
I have checked the small filler tank on top of the unit and this was low on water but i have now filled this up.
Any ideas?
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
If i was to have fault with the board or a sensor, would this indicate on the LED display?
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
If you are getting hot water from the boost button then it will not be a sensor issue or board more likely to be the off peak immersion or relay fault.
Hope this helps
Gary
MK Group Limited
Hope this helps
Gary
MK Group Limited
Re: No hot water from my PulsaCoil A CLass
Gary
how would i know if its a off peak immersion or relay fault and how can i detect this?
is it eay to fixing and is it costly?
Marco
how would i know if its a off peak immersion or relay fault and how can i detect this?
is it eay to fixing and is it costly?
Marco
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
Hi Marco,
If you have access to a multi meter test the lower off peak immersion you should get a reading of around 18ohms.
If you are getting 18ohms then it would point to the relay being faulty! if not the its the immersion.
What area are you in?
Kind regards
Gary
MK Group Limited
If you have access to a multi meter test the lower off peak immersion you should get a reading of around 18ohms.
If you are getting 18ohms then it would point to the relay being faulty! if not the its the immersion.
What area are you in?
Kind regards
Gary
MK Group Limited
Re: No hot water from my PulsaCoil A CLass
Gary
Im in the Watford Area. Do you cover this?
Marco
Im in the Watford Area. Do you cover this?
Marco
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
Hi Marco,
Yes we cover the Watford area, £45.00 per hour and we will diagnose in the first hour and possibly fix in the first hour if it is the relays. If it is the immersion then could take around 2-3 hours.
Kind regards
Gary
MK Group Limited
Yes we cover the Watford area, £45.00 per hour and we will diagnose in the first hour and possibly fix in the first hour if it is the relays. If it is the immersion then could take around 2-3 hours.
Kind regards
Gary
MK Group Limited
Re: No hot water from my PulsaCoil A CLass
Gary
what will be cost of the parts?
Marco
what will be cost of the parts?
Marco
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
Relay kit which replaces both on and off peak is £96.00 plus VAT
Gledhill Immersions are £75.00 plus VAT
Non Gledhill Immersions are £25.00 plus VAT
Kind regards
Gary
MK Group limited
Gledhill Immersions are £75.00 plus VAT
Non Gledhill Immersions are £25.00 plus VAT
Kind regards
Gary
MK Group limited
Re: No hot water from my PulsaCoil A CLass
Gary
Is there a extra charge for weekend callout?
How do i go about arranging a callout to diagnose the problem and then fix?
Marco
Is there a extra charge for weekend callout?
How do i go about arranging a callout to diagnose the problem and then fix?
Marco
Marco- Posts : 6
Join date : 2011-03-22
Re: No hot water from my PulsaCoil A CLass
Hi Marco,
Have a look at our page link below for prices.
https://gledhill-repairs.forumotion.net/t510-24-hour-service-gledhill-repair-specialists-buckinghamshire-bedfordshire-northamptonshire-oxfordshire-hertfordshire-repair-specialists
If you want a weekend appointment please call 01908 617382.
kind regards
Gary
Have a look at our page link below for prices.
https://gledhill-repairs.forumotion.net/t510-24-hour-service-gledhill-repair-specialists-buckinghamshire-bedfordshire-northamptonshire-oxfordshire-hertfordshire-repair-specialists
If you want a weekend appointment please call 01908 617382.
kind regards
Gary
Similar topics
» Pulsacoil A class, no hot water at all
» PulsaCoil A-Class running out of hot water
» No hot water from the pulsacoil class A boiler.
» Pulsacoil a class no hot water at taps.
» Pulsacoil A-Class Model PCA145 hot water too hot.
» PulsaCoil A-Class running out of hot water
» No hot water from the pulsacoil class A boiler.
» Pulsacoil a class no hot water at taps.
» Pulsacoil A-Class Model PCA145 hot water too hot.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum