Filling radiator circuit
Page 1 of 1
Filling radiator circuit
davidbrn Mon Apr 20, 2009 4:05 pm
We have a Boilermate II in our flat. It's all been working fine for the past 10 years, but now I need to take one of the radiators off - and I can't figure out how the Boilermate is keeping the radiator circuit filled. The Boilermate installation manual says the rads should be below the Boilermate, not above it. The radiators we have fitted are tall Hudevad ones, and the top of the radiators is about 250mm above the top of the Boilermate.
Given the rest of the plumbing I suspect a bodge up somehow when it was installed. Any suggestions?
Given the rest of the plumbing I suspect a bodge up somehow when it was installed. Any suggestions?
davidbrn- Posts : 1
Join date : 2009-04-20
Similar topics» What to do after draining a radiator
» Changing radiator on Boilermate II sytem?
» Gurgling noise after a new Radiator was fitted
» Boilermate 3 - radiator query
» Boilermate 2 - problem refillling the system
» Changing radiator on Boilermate II sytem?
» Gurgling noise after a new Radiator was fitted
» Boilermate 3 - radiator query
» Boilermate 2 - problem refillling the system
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum