No Hot Water
2 posters
Page 1 of 1
No Hot Water
I currently have no hot water. It started testerday, with only luke warm water. I checked the header tank, and it was around 1/4 full so I refilled it to half way, however the unit isnt heating.
The E7 timer is working, It illuminates for both off peak and boost when selected. The red light on the PCB is double flashing indicating normal. However the control circuit on LED while on is very dim, rather than its usual brightness. Neither the off peak or boost elements heat when selected on the control unit.
Is this easily fixable?
The E7 timer is working, It illuminates for both off peak and boost when selected. The red light on the PCB is double flashing indicating normal. However the control circuit on LED while on is very dim, rather than its usual brightness. Neither the off peak or boost elements heat when selected on the control unit.
Is this easily fixable?
mathewg- Posts : 5
Join date : 2014-08-31
Re: No Hot Water
Depends on the PC 2000 model you have.
It may have a relay?
It has 2 heaters.
2 rod stats.
Look through the post on here ref PC 2000's.
Mike
It may have a relay?
It has 2 heaters.
2 rod stats.
Look through the post on here ref PC 2000's.
Mike
Similar topics
» Gledhill Boilermate Class A OV - PHE (hot water) pump constantly whirring, but no hot water
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» No hot water, red fault light on, after adjusting thermostat
» Poss reason for no hot water - Check the water level at the top of the unit
» Pulsacoil 2000 -Hot water in the thermal store but cold water from the taps.
» Only short blasts of hot water in the morning, rarely hot water in the afternoon/evening
» No hot water, red fault light on, after adjusting thermostat
» Poss reason for no hot water - Check the water level at the top of the unit
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum