Pulsar coil 2000
2 posters
Page 1 of 1
Pulsar coil 2000
I have a Pulsarcoil 2000 and the other morning the economy 7 timer nearly caught fire so i replaced the timer and works correctly but the boiler doesnt sound the same as before. I have 2 flashes on the PCB but i used to always hear the hot water bubbling away as soon as the timer kicked in. My water is coming out hot but i'm not sure if the pump is ok or a thermostat has gone. Can you please help?
Charles Jennings- Posts : 2
Join date : 2012-02-19
Re: Pulsar coil 2000
I Have noticed the water is coming out very hot any ideas?
Charles Jennings- Posts : 2
Join date : 2012-02-19
Re: Pulsar coil 2000
Hi Charles
From the problem that you have experienced, I would strongly advise that you get a qualified engineer to check your unit, as it would be incorrect for me to give you further advice gieven the potential seriousness of your timer nearly catching fire.
From the problem that you have experienced, I would strongly advise that you get a qualified engineer to check your unit, as it would be incorrect for me to give you further advice gieven the potential seriousness of your timer nearly catching fire.
Similar topics
» Dousing Pulsa Coil 2000
» pulsa coil 2000
» Pulsa coil 2000 overheating!!!
» **new flat** Best way to run pulsa coil 2000?
» gledhill 2000 pulse coil
» pulsa coil 2000
» Pulsa coil 2000 overheating!!!
» **new flat** Best way to run pulsa coil 2000?
» gledhill 2000 pulse coil
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|